L15
Measuring 550mm wide x 439mm high x 650mm deep and weighing 35Kg, the L15 sub employs a 15″ long excursion driver in Baltic birch / poplar plywood cabinet with threaded inserts for mounting accessories and an M20 stand fitting. With a frequency range of 40Hz-120Hz, and 139dB Peak SPL, The L15 is specially designed in a footprint to match the P12, making it a perfect partner in flown applications, and for use as a drum fill.
L15
L15-I
Measuring 550mm wide x 439mm high x 650mm deep, the installation version of the L15 sub employs a 15″ long excursion driver in Baltic birch / poplar plywood cabinet with a fabric covered grille and threaded inserts for mounting accessories, and quick-connect push connector. With a frequency range of 40Hz-120Hz, and 139dB Peak SPL, the L15 is perfect for extending the low frequency response of P+ Series installations.
L15-I
L18
Measuring 680mm wide x 559mm high x 775mm deep and weighing 50Kg, the L18 sub employs a 18″ long excursion driver in Baltic birch / poplar plywood cabinet with threaded inserts for mounting accessories and an M20 stand fitting. With a frequency range of 32Hz-120Hz, and 140dB Peak SPL, The L18 is specially designed in a footprint to match the P15, making it a perfect partner in flown applications, and for use as a drum fill.
L18
L18-I
Measuring 680mm wide x 559mm high x 775mm deep, the installation version of the L18 sub employs a 18″ long excursion driver in Baltic birch / poplar plywood cabinet with a fabric covered grille and threaded inserts for mounting accessories, and quick-connect push connector. With a frequency range of 32Hz-120Hz, and 140dB Peak SPL, the L18-I is perfect for extending the low frequency response of P+ Series installations.
L18-I
L20
Measuring 755mm wide x 594mm high x 905mm deep and weighing 59Kg, the L20 sub employs a 20″ long excursion driver in Baltic birch / poplar plywood cabinet with threaded inserts for mounting accessories and an M20 stand fitting. With a frequency range of 28Hz-120Hz, and 141dB Peak SPL, The L20 is specially designed in a footprint to match the P18, making it a perfect partner in flown applications, and for use as a drum fill or side fill.
L20
L20-I
Measuring 755mm wide x 594mm high x 905mm deep, the installation version of the L20 sub employs a 20″ long excursion driver in Baltic birch / poplar plywood cabinet with a fabric covered grille and threaded inserts for mounting accessories, and quick-connect push connector. With a frequency range of 28Hz-120Hz, and 141dB Peak SPL, The L20-I is perfect for extending the low frequency response of P+ Series installations.
L20-I
IDS312-T
Measuring 1160mm x 380mm x 350mm (45.7 x 15.0” x 13.8”) and weighing 31kg (68lbs), the IDS312 dedicated sub for ID84 columns features a convenient system for mounting and connecting an ID84 cabinet on top, extending system LF response down to 40Hz and creating a full range system that’s 2 metres in height. Constructed from 15mm Baltic birch plywood, the IDS312 also features rubber strips to isolate vibration in horizontally-mounted applications.
Available in black, white and custom RAL colours, the touring version (IDS312-T) is IP2X rated and features a steel grille and Speakon connectors.
IDS312-T
IDS312-I
Measuring 1160mm x 380mm x 350mm (45.7 x 15.0” x 13.8”) and weighing 31kg (68lbs), the IDS312 dedicated sub for ID84 columns features a convenient system for mounting and connecting an ID84 cabinet on top, extending system LF response down to 40Hz and creating a full range system that’s 2 metres in height. Constructed from 15mm Baltic birch plywood, the IDS312 also features rubber strips to isolate vibration in horizontally-mounted applications.
The installation version (IDS312-I) is IP2X rated and features a cloth covered grille. Speakers can be specified in custom RAL colours and use a cable gland with a 2-core cable for audio input.
IDS312-I
IDS312-TIS
Measuring 1160mm x 380mm x 350mm (45.7 x 15.0” x 13.8”) and weighing 31kg (68lbs), the IDS312 dedicated sub for ID84 columns features a convenient system for mounting and connecting an ID84 cabinet on top, extending system LF response down to 40Hz and creating a full range system that’s 2 metres in height. Constructed from 15mm Baltic birch plywood, the IDS312 also features rubber strips to isolate vibration in horizontally-mounted applications.
Also available in black, white and custom RAL colours, the hybrid TIS version (IDS312-TIS) is IP2X rated and features the Speakon connectivity of the touring version with the cloth covered grille of the installation version.
IDS312-TIS
IDS110-T
Compact and powerful, the 1×10″ sub measures just 285mm high x 525mm wide x 550mm deep, offering punchy sub bass performance in the smallest form factor. The touring version has handles and pole-mounting hardware, and features Speakon connectivity.
IDS110-T
IDS110-E
Compact and powerful, the 1×10″ sub measures just 285mm high x 525mm wide x 550mm deep, offering punchy sub bass performance in the smallest form factor. The install version has no handles and hardware, and features captive cable connectivity.
IDS110-E
IDS210-T
For applications where space is less restricted, the 2×10″ double sub delivers stunning performance in a box measuring just 285mm high x 1050mm wide x 550mm deep. The touring version has handles and pole-mounting hardware, and features Speakon connectivity.
IDS210-T
IDS210-E
For applications where space is less restricted, the 2×10″ double sub delivers stunning performance in a box measuring just 285mm high x 1050mm wide x 550mm deep. The install version has no handles and hardware, and features captive cable connectivity.
IDS210-E
STM S118 Sub Module
Sub-bass cabinet featuring a Neodymium high excursion 3000W 18″ driver. A bandpass load ensures SPL output equivalent to conventional dual 18″ sub-basses. Same width, double the height of M46 main cabinet, double height of main cabinet so the S118 can be flown in the array or ground-stacked in line. Can be run in omnidirectional or cardioid sub mode.
S118 features innovative PistonRigTM and REDLockTM rigging, enabling any size of system to be flown safely by one person. REDLockTM handle locks front rigging points from rear of cabinet. All adjustments made from one position at rear of cluster.
STM S118 Sub Module
MSUB12
Constructed from Baltic birch play, the MSUB 12 sub bass module measures 396mm wide (15.6″) x 433mm high (17″) x 550mm deep (21.7″) and weighs 23kg (51lbs). It employs a single 12″, 6 Ohm, long excursion Neodymium driver in a high-efficiency, band pass cabinet design with a quadratic shaped profiled port.
Slightly wider than the GEO M6 main and bass modules, rigging hardware makes it easy to deploy the MSUB 12 in ground stacks and line arrays of various scales. Amplification and processing are via NEXO’s NXAMP4x1MK2, with a single channel required for each sub.
With a nominal peak SPL of 130dB, the MSUB 12 has available crossover frequencies of 45-85, 45-120, 45-150, 63-120 and 63- 150Hz, extending LF response down to 45Hz.
MSUB12
MSUB15
Measuring 437mm wide x 531mm high x 704mm deep and weighing 40Kg, the MSUB15 is the same width as the GEO M10 main cabinet, and 50% higher. Cabinets are constructed from Baltic birch ply with large composite bumpers on the corners, and feature integral rigging. Employing a single 15″ diameter / 3″ voice coil Neodymium driver in a high-efficiency band pass cabinet design with a quadratic shaped profiled port, the MSUB15 can be deployed in Omni or Cardioid modes and is available in black, white or custom RAL colours. The touring version features a steel front grille and Speakon connectors (front and back).
MSUB15
MSUB15-I
Measuring 437mm wide x 531mm high x 704mm deep and weighing 40Kg, the MSUB15-I is the same width as the GEO M10 main cabinet, and 50% higher. Cabinets are constructed from Baltic birch ply with large composite bumpers on the corners, and feature integral rigging. Employing a single 15″ diameter / 3″ voice coil Neodymium driver in a high-efficiency band pass cabinet design with a quadratic shaped profiled port, the MSUB15-I can be deployed in Omni or Cardioid modes and is available in black, white or custom RAL colours. The Installation version features an acoustic fabric grille and cable connectors (front and back).
MSUB15-I
MSUB18
Measuring 701mm wide x 525mm high x 704mm deep and weighing 55 kg, the MSUB18 is the same width as the GEO M12 main cabinet, and 41% higher. Cabinets are constructed from Baltic birch ply with large composite bumpers on the corners, and feature integral rigging. Employing a single 18″ diameter voice coil Neodymium driver in a high-efficiency band pass cabinet design with a quadratic shaped profiled port, the MSUB18 can be deployed in Omni or Cardioid modes and is available in black, white or custom RAL colours. The MSUB18 is the touring version.
MSUB18
MSUB18-I
Measuring 701mm wide x 525mm high x 704mm deep and weighing 55 kg, the MSUB18-I is the same width as the GEO M12 main cabinet, and 41% higher. Cabinets are constructed from Baltic birch ply with large composite bumpers on the corners, and feature integral rigging. Employing a single 18″ diameter voice coil Neodymium driver in a high-efficiency band pass cabinet design with a quadratic shaped profiled port, the MSUB18 can be deployed in Omni or Cardioid modes and is available in black, white or custom RAL colours. The MSUB18-I is the installation version.
MSUB18-I
RS18
The RS18 uses two 18″ long excursion Neodymium drivers drivers in a low profile cabinet to extend system response down to 30Hz. NEXO’s patent pending RAY SUB Technology is based on optimising the positioning and phase relationships of radiating surfaces in vented enclosures, permitting acoustic distance from rear to front sections to always increase as frequency decreases. Consequently rear and front sections sum up efficiently over the entire subwoofer bandwidth, allowing for an average of 5dB gain from the rear section in the forward direction and cancelling in the rear direction.
RS18