M28-I
				
					
						Kompaktes Line-Array-Element mit 2 x 8-Zoll-Treibern bietet 90°/120° horizontale Abstrahlung und 0° bis 15° Spreizung zwischen den Modulen. Die Installationsversion des M28 bietet Compass RigTM, welches eine Voreinstellung der Spreizwinkel zwischen den Modulen erlaubt.
					 
					
					
						
							
							Key Features
							
								
								  		
																   - Installationsversion des M28
- 2 x 8-Zoll-LF-Treiber
- 2 x HF-Kompressionstreiber
- 141 dB SPL Spitzenpegel
- Frequenzgang: 65 Hz – 19 kHz
- H 234 mm/W 575 mm/D 653 mm
 
					
					
					
									
						
							
							Specifications
							
						| Frequency Response | 65Hz – 19kHz ±3dB | 
| Usable Range @-6dB | 60Hz – 20kHz | 
| Sensitvity 1W@1m | 106dB SPL Nominal (120° horizontal coverage) 107dB SPL Nominal (90° horizontal coverage) | 
| Peak SPL@1m | 140dB Peak (120° horizontal coverage) 141dB Peak (90° horizontal coverage) | 
| Dispersion | Configurable 90°-120° Horizontal x 0-15° vertical | 
| Available Crossover Frequencies | 900Hz (Active) | 
| Nominal Impedance | LF: 8 Ω (6 Ω min) - HF: 8 Ω (6 Ω min) | 
| Amplified Controller | NXAMP4x4 - 3xSTM M28 in parallel on 2 NXAMP4x4 channels - 2x4000W/2Ω | 
							
						 
					
										
					
										
						
							
							Features
							
							| Components | LF: 2 x 8" (20cm) high excursion 16 Ω Neodymium drivers | 
|  | HF: 2 x 2.5" voice coil, 1.4" throat Neodymium 16 Ω drivers, Ketone Polymer diaphragm | 
| Height x Width x Depth | 234 x 575 x 653 mm – 9.2" x 22.6" x 25.7" | 
| Construction | PU Composite Low Density – Polyurethane water based black coating | 
| Front Finish | Perforated Dark Grey Metal Grille | 
| Rigging | Integral 3 points flying system. Intercabinet angle adjustments from 0.2° to 15° in logarithmic steps. | 
| System Operation |  | 
| Electronic Controller | The NEXO NXAMP4x4 presets are precisely matched to the STM Series cabinets and include sophisticated protection algorithms. Using STM Series cabinets without a properly connected NEXO NXAMP4x4 will result in poor sound quality and can damage components. | 
|  |  | 
|  |  | 
|  |  |