M28-I
M28-I

M28-I

2 enceintes line array compactes de 8 pouces fournissant une dispersion horizontale entre 90° et 120° et un angle d’écartement entre les modules de 0° à 15°. La version fixe du M28 est dotée de Compass RigTM, permettant de prédéfinir les valeurs d’angles de l’inter-caisson.

Caractéristiques Principales

  • Version fixe du M28
  • 2 haut-parleurs de graves de 8 pouces
  • 2 moteurs d’aigus à compression
  • Pression acoustique maximale 141 dB
  • Réponse en fréquence : de 65 Hz à 19 kHz
  • H : 234 mm/L : 575 mm/P : 653 mm

Spécifications

Frequency Response65Hz – 19kHz ±3dB
Usable Range @-6dB60Hz – 20kHz
Sensitvity 1W@1m106dB SPL Nominal (120° horizontal coverage) 107dB SPL Nominal (90° horizontal coverage)
Peak SPL@1m140dB Peak (120° horizontal coverage) 141dB Peak (90° horizontal coverage)
DispersionConfigurable 90°-120° Horizontal x 0-15° vertical
Available Crossover Frequencies900Hz (Active)
Nominal ImpedanceLF: 8 Ω (6 Ω min) - HF: 8 Ω (6 Ω min)
Amplified ControllerNXAMP4x4 - 3xSTM M28 in parallel on 2 NXAMP4x4 channels - 2x4000W/2Ω

Caractéristiques

ComponentsLF: 2 x 8" (20cm) high excursion 16 Ω Neodymium drivers
HF: 2 x 2.5" voice coil, 1.4" throat Neodymium 16 Ω drivers, Ketone Polymer diaphragm
Height x Width x Depth234 x 575 x 653 mm – 9.2" x 22.6" x 25.7"
ConstructionPU Composite Low Density – Polyurethane water based black coating
Front FinishPerforated Dark Grey Metal Grille
RiggingIntegral 3 points flying system. Intercabinet angle adjustments from 0.2° to 15° in logarithmic steps.
System Operation
Electronic ControllerThe NEXO NXAMP4x4 presets are precisely matched to the STM Series cabinets and include sophisticated protection algorithms. Using STM Series cabinets without a properly connected NEXO NXAMP4x4 will result in poor sound quality and can damage components.