M28-I
M28-I

M28-I

紧凑的 2 x 8 英寸驱动器线阵列元件,确保 90°/120° 的水平色散和模块之间 0° 至 15° 的张开角。M28 的安装版采用 Compass RigTM,允许预先设置机柜间角度值。

主要特点

  • M28 安装版
  • 两个 8 英寸低频驱动器
  • 两个高频压缩驱动器
  • 141dB 声压级峰值
  • 频率响应范围:65Hz 至 19kHz
  • H234mm/W575mm/D653mm

产品参数

Frequency Response65Hz – 19kHz ±3dB
Usable Range @-6dB60Hz – 20kHz
Sensitvity 1W@1m106dB SPL Nominal (120° horizontal coverage) 107dB SPL Nominal (90° horizontal coverage)
Peak SPL@1m140dB Peak (120° horizontal coverage) 141dB Peak (90° horizontal coverage)
DispersionConfigurable 90°-120° Horizontal x 0-15° vertical
Available Crossover Frequencies900Hz (Active)
Nominal ImpedanceLF: 8 Ω (6 Ω min) - HF: 8 Ω (6 Ω min)
Amplified ControllerNXAMP4x4 - 3xSTM M28 in parallel on 2 NXAMP4x4 channels - 2x4000W/2Ω

外观特征

ComponentsLF: 2 x 8" (20cm) high excursion 16 Ω Neodymium drivers
HF: 2 x 2.5" voice coil, 1.4" throat Neodymium 16 Ω drivers, Ketone Polymer diaphragm
Height x Width x Depth234 x 575 x 653 mm – 9.2" x 22.6" x 25.7"
ConstructionPU Composite Low Density – Polyurethane water based black coating
Front FinishPerforated Dark Grey Metal Grille
RiggingIntegral 3 points flying system. Intercabinet angle adjustments from 0.2° to 15° in logarithmic steps.
System Operation
Electronic ControllerThe NEXO NXAMP4x4 presets are precisely matched to the STM Series cabinets and include sophisticated protection algorithms. Using STM Series cabinets without a properly connected NEXO NXAMP4x4 will result in poor sound quality and can damage components.