M28
Kompaktes Line-Array-Element mit 2 x 8-Zoll-Treibern bietet 90°/120° horizontale Abstrahlung und 0° bis 15° Spreizung zwischen den Modulen. Das M28 bietet innovatives Rigging mit CompassRigTM und REDLockTM und ermöglicht das sichere Fliegen beliebig großer Systeme mit einem kleinen Team. Mit Compass RigTM können die Spreizwinkel zwischen den Modulen voreingestellt werden. Mit dem REDLockTM-Griff verriegeln Sie die vorderen Rigging-Punkte von der Gehäuserückseite aus. Alle Einstellungen werden von einer Position aus an der Rückseite des Clusters vorgenommen.
Key Features
- 2 x 8-Zoll-LF-Treiber
- 2 x HF-Kompressionstreiber
- 141 dB SPL Spitzenpegel
- Frequenzgang: 65 Hz – 19 kHz
- H 234 mm/W 575 mm/D 653 mm
- 37Kg
Specifications
| Frequency Response | 65Hz – 19kHz ±3dB |
| Usable Range @-6dB | 60Hz – 20kHz |
| Sensitvity 1W@1m | 106dB SPL Nominal (120° horizontal coverage) 107dB
SPL Nominal (90° horizontal coverage) |
| Peak SPL@1m | 140dB Peak (120° horizontal coverage) 141dB Peak (90°
horizontal coverage) |
| Dispersion | Configurable 90°-120° Horizontal x 0-15° vertical |
| Available Crossover
Frequencies | 900Hz (Active) |
| Nominal Impedance | LF: 8 Ω (6 Ω min) - HF: 8 Ω (6 Ω min) |
| Amplified Controller | NXAMP4x4 - 3xSTM M28 in parallel on 2 NXAMP4x4
channels - 2x4000W/2Ω |
Features
| Components | LF: 2 x 8" (20cm) high excursion 16 Ω Neodymium
drivers |
| HF: 2 x 2.5" voice coil, 1.4" throat Neodymium 16 Ω
drivers, Ketone Polymer diaphragm |
| Height x Width x Depth | 234 x 575 x 653 mm – 9.2" x 22.6" x 25.7" |
| Weight: Net | 37 kg – 82 lbs |
| Connectors | 2 x NLT4-MDV Speakon
4 poles |
| Construction | PU Composite Low Density – Polyurethane water based
black coating |
| Fittings | 2 x side handles / 1 x rear handle |
| Front Finish | Perforated Dark Grey Metal Grille |
| Rigging | Integral 3 points flying system. Intercabinet angle adjustments
from 0.2° to 15° in logarithmic steps. |
| System Operation | |
| Electronic Controller | The NEXO NXAMP4x4 presets are precisely matched
to the STM Series cabinets and include sophisticated
protection algorithms. Using STM Series cabinets without
a properly connected NEXO NXAMP4x4 will result in poor
sound quality and can damage components. |
| Speaker cabling | 1-/1+: LF - 2-/2+: MF/HF |
