ePS10

ePS10 尺寸为 531mm x 316mm x 285mm(高 x 宽 x 深),重 14.8 千克,在梯形箱体中组合了高偏移 10 英寸低频驱动器和 1.4 英寸音圈高频驱动器,采用低音反射设计,音箱采用 15 mm 波罗的海桦木胶合板制成。ePS10 的峰值声压级为 130dB,频率范围为 70Hz 至 20kHz,具有可旋转的非对称喇叭、音箱顶部、方便在底部和背面上安装的吊挂点以及位于螺距螺纹端子板上的两对输入/输出连接器(配 IP 盖)。

主要特点

  • 用于固定安装应用的高功率(130 dB 峰值)点声源扬声器
  • 轻质(14.8 千克/32.6 磅)设计
  • 坚固的 15 mm 桦木胶合板外壳
  • NEXO 非对称扩散恒定指向喇叭设计(“PS”喇叭),可旋转
  • IP55 防护等级
  • 用于部署在各种固定安装应用中的完备附件
  • 黑色饰面(提供定制 RAL 颜色)

产品参数

频率响应范围 (-6 dB)70 Hz 至 20 kHz
灵敏度为 1W (1m)101 dB SPL(标称)
峰值声压级 (1m)130 dB
垂直扩散+25°/-30°
水平扩散50° 至 100°(不对称)
分频点70 Hz, 120 Hz
标称阻抗8 Ω
推荐功率500 至 800 W/8 欧姆

外观特征

Number of ways2 ways passive
LF Component10" 8 Ohms long excursion neodymium driver
HF Component1.4" diaphragm 8 Ohms HF driver on an Asymmetrical Dispersion (“PS”) horn
Connectors2 pairs (In/Out) of 7.62 mm pitch screw terminal blocks (+/- poles)
Compatible cables sectionCables from 1.5 mm² to 3.3 mm² (AWG 12 to 15) copper section
Compatible cables outside diameterCable with maximum outside diameter of 11 mm
Rigging points3x M6 - 70 mm pitch rigging points (back) + 2x extra M6 and 1x M10 (top/bot)
Material15 mm thick birch plywood body and galvanized grille
FinishBlack structural paint (RAL9005 or Custom RAL upon request)
Front FinishUV & Fire resistant acoustic fabric
Height x Width x Depth531mm x 316mm x 285mm (20.9" x 12.4" x 11.2")
Weight: Net14.8 kg (32.6 lbs)
Operating temperature range0°C - 40 °C (32° F - 104° F)
Storage temperature range-20 °C - 60 °C (-4 ° F - 140° F)
IP RatingIP55
System Operation
Recommended powering solutionNXAMP4x1mk2 Powered TDcontroller: 1 x ePS10 per channel
Optional powering solutionDTDcontroller + DTDAMP4x1.3 : Up to 2 x ePS10 per channel
NXAMP4x2mk2 Powered TDcontroller: Up to 4 x ePS10 per channel
NXAMP4x4mk2 Powered TDcontroller: Up to 4 x ePS10 per channel