Home > RS15

Viewing Product

RS15

2x RS15 with handles 2x RS15 Omni-directional Mode 2x RS15 Alternate directional Mode

The RS15 is the first product to feature NEXO’s patent-pending RAY SUB Technology. Comprised of a 15 inch transducer with a frequency response of 35Hz – 200Hz in omni or 35Hz- 150Hz in directional mode and a sensitivity of 105db SPL, the RS 15 presents an unchallenged versatility for installation and touring requirements.

The RS15 sub does not face the same direction while in omni and cardioid mode. In cardioid mode, the RS15 sidewalls (where the rigging system is attached) behave as the cabinet's front and rear face

As such, RS15's cardioid LF and VLF energy propagates from only one end of the enclosure, rather than from the front face. This behavior is maintained regardless of whether speaker cones are positioned on the side or top.

RS15 PRODUCT FEATURES
Components	2 x 15” (38cm) long excursion neodymium 8Ω drivers
Height x Width x Depth	454 x 564 x 1074mm ( 17.9” x 22.2” x 42.3” ) without accessories
Shape	Rectangular
Weight	Net Weight without accessories 52Kg (115 lbs)
Connectors	2 x NL4MP SPEAKON 4 pole (In & Through)
Construction	Baltic birch ply finish with structured black coating. Dark grey carpet finish also available.
RS15 WITH NX242-ES4 TD CONTROLLER OR NXAMP SYSTEM SPECIFICATION
Omni Mode
Frequency Response @ -3db [a]	35Hz - 100Hz
Usable Range @ -6db [a]	35Hz - 250Hz
Sensitivity 1W @ 1m [b]	105dB SPL Nominal
Peak SPL @ 1m [b]	136 – 139dB Peak (2x700W to 2 x 1200W/8Ω)
Dispersion	Omni & Directional pattern over the entire useable bandwidth depending on the NX242 or NXAMP TDcontrollers setup. (two channels of the NX242ES4 or NXAMP are required to process directional setups)
Directivity Index [c]	1.5
Crossover Frequency: NX242 or NXAMP TDcontrollers preset dependent	From 80Hz to 200Hz
Nominal Impedance	2 x 8Ω
Recommended Amplifiers	1 amplifier channel is required for omni mode operation, rated at 1400 to 2400 Watts into 4Ω
SYSTEM OPERATION
Electronic Controller	GEOS12 Analogue TDController, NX242ES4 Digital TDController & NXAMP Powered Digital. TDController presets are precisely matched to RS15 and include sophisticated protection systems. Using RS15 without a properly connected NEXO TDController will result in poor sound quality and can damage components.
Speaker Cables	1-/1+ = Right or Rear 2-/2+ = Left or Front RS15 must use separate cables to the main system
Accessories	Bumper – Flying Plates – Handles - Dolly- Wheels – Push Pins
Rigging System [d]	Please refer to the user manual before any operation.

RS15 PRODUCT FEATURES
Components	2 x 15” (38cm) long excursion neodymium 8Ω drivers
Height x Width x Depth	454 x 564 x 1074mm ( 17.9” x 22.2” x 42.3” ) without accessories
Shape	Rectangular
Weight	Net Weight without accessories 52Kg (115 lbs)
Connectors	2 x NL4MP SPEAKON 4 pole (In & Through)
Construction	Baltic birch ply finish with structured black coating. Dark grey carpet finish also available.
RS15 WITH NX242-ES4 TD CONTROLLER OR NXAMP SYSTEM SPECIFICATION
Directional Mode
Frequency Response @ -3db [a]	35Hz - 100Hz
Usable Range @ -6db [a]	35Hz - 150Hz
Sensitivity 1W @ 1m [b]	103dB SPL Nominal
Peak SPL @ 1m [b]	133 – 136dB Peak (2x700W to 2 x 1200W/8Ω)
Dispersion	Omni & Directional pattern over the entire useable bandwidth depending on the NX242 or NXAMP TDcontrollers setup. (two channels of the NX242ES4 or NXAMP are required to process directional setups)
Directivity Index [c]	Q=4.3 DI=5.3dB
Crossover Frequency: NX242 or NXAMP TDcontrollers preset dependent	From 80Hz to 125Hz
Nominal Impedance	2 x 8Ω
Recommended Amplifiers	2 amplifier channels are required for directional mode operation, each rated at 700 to 1200 Watts into 8Ω per channel
SYSTEM OPERATION
Electronic Controller	GEOS12 Analogue TDController, NX242ES4 Digital TDController & NXAMP Powered Digital TDController presets are precisely matched to RS15 and include sophisticated protection systems. Using RS15 without a properly connected NEXO TDController will result in poor sound quality and can damage components.
Speaker Cables	1-/1+ = Right or Rear 2-/2+ = Left or Front RS15 must use separate cables to the main system
Accessories	Bumper – Flying Plates – Handles - Dolly- Wheels – Push Pins
Rigging System [d]	Please refer to the user manual before any operation.