WORLD CLASS PERFORMANCE

The new PS15-R2 Loudspeaker is designed to provide both exceptional PA and stage monitor performance from a single product without compromise.

This flexibility is realized by a proprietary constant directivity asymmetrical dispersion horn, easily rotated in four positions by the user. Coupled with the horn’s unique progressive horizontal (50° to 100°) and vertical (55°) dispersion, the most suitable pattern can be selected for vertical or horizontal PA usage or wedge monitoring. The 2-way passive 8Ω design uses a single amplifier channel to deliver bi-amped performance for less money, space and complexity.

The PS15-R2 can be driven with up to 2000 Watts of amplifier power.

SYSTEM APLLICATIONS
• High-power mid-sized touring, installed PA for clubs, A/V, theater, Houses of Worship, broadcast, etc.
• High-quality, extremely powerful stage monitoring for A/V, theatere, cabarets, broadcast, etc.
• Fill-in system for any PA requiring side, down and near-field augmentation.

The PS15 TDController R2 is an advanced analogue processor that allows the PS15-R2 Loudspeaker and optional RS15 Subwoofer to achieve exceptional performance from such compact packages. The PS15TD-R2 provides crossover, sensed amplifier control and system equalisation optimised for the PS15-R2 and RS15.

The PS15TD-R2 also features user-selectable passive or active (bi-amp) operation of the PS15R2 Loudspeaker. One PS15TD-R2 has two inputs and three outputs, including summed sub out, minimising
installation cost and complexity.

Like all NEXO processors, the PS15TD-R2 provides precision dynamic, voice coil temperature and diaphragm displacement protection through the use of selective Voltage Controlled Equalisers (VCEQs), reducing levels only at frequencies when and where necessary.

The RS15 is the first product to feature NEXO’s patent-pending RAY SUB Technology. Comprised of a 15 inch transducer with a frequency response of 35Hz – 200Hz in omni or 35Hz- 150Hz in directional mode and a sensitivity of 105db SPL, the RS 15 presents an unchallenged versatility for installation and touring requirements.

The RS15 sub does not face the same direction while in omni and cardioid mode. In cardioid mode, the RS15 sidewalls (where the rigging system is attached) behave as the cabinet's front and rear face

As such, RS15's cardioid LF and VLF energy propagates from only one end of the enclosure, rather than from the front face. This behavior is maintained regardless of whether speaker cones are positioned on the side or top.